Products Center
>
>
>
GW23-252D outdoor AC high voltage isolating switch
Number of views:
1000

GW23-252D outdoor AC high voltage isolating switch

GW23(GT9)-252D/2500-50 type double column (horizontal fracture) foldable outdoor AC high voltage isolating switch is suitable for AC frequency 50Hz, rated voltage 220kV system, used for high-voltage lines, circuit breakers and other electrical equipment without It can be electrically isolated under load and can also be used for switching operation. It is a mature product recommended by our company for high-voltage power distribution networks. It analyzes the defects of the current isolation switch conductive circuit overheating, operating mechanism failure, and severe corrosion of metal materials. After major improvements, it has been successfully developed. The product has many advantages such as beautiful appearance, simple structure, corrosion resistance, good seismic performance, safe and reliable electrical and mechanical performance.
Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number
A1
Quantity
-
+
Stock:
0

For more information, please send an email or call our hotline.

1
Detail
Parameters
Features
Technical Parameter
Case

GW23(GT9)-252D/2500-50 type double column (horizontal fracture) foldable outdoor AC high voltage isolating switch is suitable for AC frequency 50Hz, rated voltage 220kV system, used for high-voltage lines, circuit breakers and other electrical equipment without It can be electrically isolated under load and can also be used for switching operation. It is a mature product recommended by our company for high-voltage power distribution networks. It analyzes the defects of the current isolation switch conductive circuit overheating, operating mechanism failure, and severe corrosion of metal materials. After major improvements, it has been successfully developed. The product has many advantages such as beautiful appearance, simple structure, corrosion resistance, good seismic performance, safe and reliable electrical and mechanical performance.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

1、Advanced friction contact

  • Good conductivity

  • Guaranteed low loop resistance

  • Each contact is equipped with independent spring

  • The spring does not carry current and has a long life

2、The two states of opening and closing can be self-locked and maintained, effectively preventing the dynamic and static contacts from being separated by the influence of wind and electric power;
3、The transmission link adopts oil-free bearing and copper alloy bushing, which has self-lubricating ability, which reduces the rust and jam of the rotating link;
4、Use anti-rust aluminum and stainless steel materials to avoid surface corrosion;
5、Different surface treatment methods are selected according to the place of use, including hot-dip galvanizing and spray painting, Dacromet, nickel-phosphorus alloy composite plating, etc.; for transmission parts, the nickel-phosphorus alloy composite plating process is used, which has better wear resistance than Dacromet;
6、The main switch is a three-pole linkage, with electric and manual operation modes;
7、Equipped with earthing switch

  • Manual operation

  • Same short-circuit current carrying capacity as isolation switch

  • Electrical and mechanical double interlock with isolating switch

8、Configure ice breaker
9、Large contact range of dynamic and static contacts
10、The return spring and clamping spring are used to make the tightening process stable and the clamping force constant and reliable
11、The silver-plated surface is coated with new electronic oil, which effectively delays the oxidation of the silver layer.

Serial number

Name

unit

Parameter

1

Rated voltage

kV

252

2

Rated current

A

2500

3

Isolation switch and ground knife peak withstand current (peak value)

kA

125

4

3s short-term withstand current of isolation switch and grounding knife (effective value)

kA

50

5

Isolating switch main loop resistance

μΩ

≤130

6

1 minute power frequency withstand current (effective value)

On the ground (dry, wet)

kV

395

Fracture

kV

460

7

Lightning impulse withstand voltage (1.2/50μs)

To the ground

kV

950

Fracture

kV

1050

8

Mechanical life of isolating switch and earthing switch

Times

2000 each

Related products

110kV power transformer
110kV power transformer
The 110kV power transformer developed and produced by Tianan Electric is a series of products successfully produced through continuous exploration and improvement based on the digestion and absorption of advanced transformer manufacturing technology at home and abroad. The reliability and performance indicators of the products are Reach the domestic advanced level.
Learn More + 白箭头 黑箭头
220kV power transformer
220kV power transformer
The 220kV power transformer developed and produced by Tianan Electric adopts a 110kV power transformer folded plate fuel tank structure, which makes the product structure more reasonable, convenient for on-site installation and hanging cover inspection, and combines the company’s years of experience in transformer production and design, product reliability and performance The indicators have reached the international advanced level. After continuous improvement and improvement, a series of products have been formed. The product series include three-phase dual-winding and three-winding non-excitation voltage-regulating transformers, on-load voltage-regulating transformers and autotransformers.
Learn More + 白箭头 黑箭头
YBT13-40.5 series wind power/photovoltaic China box substation
YBT13-40.5 series wind power/photovoltaic China box substation
The YBT13-40.5 series of wind power/photovoltaic Chinese box substation is a novel wind power/photovoltaic substation product developed by Tianan Electric by fully combining the advantages of wind power/photovoltaic American box substation miniaturization and European box substation energy to achieve power distribution automation requirements.
Learn More + 白箭头 黑箭头
YBT13-40.5 European-style box substation for wind power photovoltaic
YBT13-40.5 European-style box substation for wind power photovoltaic
YBT13-40.5 series wind power/photovoltaic European box substation is a novel wind power/photovoltaic special pre-installed substation product developed by Tianan Electric. The product integrates step-up transformer (axial double split body transformer), high-voltage vacuum switch, lightning arrester, intelligent low-voltage vacuum circuit breaker and corresponding auxiliary equipment in one, and boosts the 690V (315V) voltage from wind (photovoltaic) power generation devices When the voltage level is as high as 35kV, the electric energy is output through the cable line, which is an ideal supporting equipment for wind power (photovoltaic) power generation system.
Learn More + 白箭头 黑箭头
Tianan
Service Hotline

Service Hotline:

CONTCT US

Address: No. 1288, Danyang Road, Dandong Street, Xiangshan County, Zhejiang Province, 315700
TEL:4001661118
E-mail:sales@tianan.com

Tianan

Copyright © 2021 Ningbo Tianan (Group) Co.,Ltd.  All rights reserved. 浙ICP备11039175号-1 Powered by www.300.cn

Copyright © 2021 Ningbo Tianan (Group) Co.,Ltd.  All rights reserved. 浙ICP备11039175号-1 Powered by www.300.cn